Referring to the null object in Python


How do I refer to the null object in Python?

6/20/2020 2:50:12 PM

Accepted Answer

In Python, the 'null' object is the singleton None.

The best way to check things for "Noneness" is to use the identity operator, is:

if foo is None:
7/20/2010 11:54:27 AM

None, Python's null?

There's no null in Python; instead there's None. As stated already, the most accurate way to test that something has been given None as a value is to use the is identity operator, which tests that two variables refer to the same object.

>>> foo is None
>>> foo = 'bar'
>>> foo is None

The basics

There is and can only be one None

None is the sole instance of the class NoneType and any further attempts at instantiating that class will return the same object, which makes None a singleton. Newcomers to Python often see error messages that mention NoneType and wonder what it is. It's my personal opinion that these messages could simply just mention None by name because, as we'll see shortly, None leaves little room to ambiguity. So if you see some TypeError message that mentions that NoneType can't do this or can't do that, just know that it's simply the one None that was being used in a way that it can't.

Also, None is a built-in constant. As soon as you start Python, it's available to use from everywhere, whether in module, class, or function. NoneType by contrast is not, you'd need to get a reference to it first by querying None for its class.

>>> NoneType
NameError: name 'NoneType' is not defined
>>> type(None)

You can check None's uniqueness with Python's identity function id(). It returns the unique number assigned to an object, each object has one. If the id of two variables is the same, then they point in fact to the same object.

>>> NoneType = type(None)
>>> id(None)
>>> my_none = NoneType()
>>> id(my_none)
>>> another_none = NoneType()
>>> id(another_none)
>>> def function_that_does_nothing(): pass
>>> return_value = function_that_does_nothing()
>>> id(return_value)

None cannot be overwritten

In much older versions of Python (before 2.4) it was possible to reassign None, but not any more. Not even as a class attribute or in the confines of a function.

# In Python 2.7
>>> class SomeClass(object):
...     def my_fnc(self):
...             self.None = 'foo'
SyntaxError: cannot assign to None
>>> def my_fnc():
        None = 'foo'
SyntaxError: cannot assign to None

# In Python 3.5
>>> class SomeClass:
...     def my_fnc(self):
...             self.None = 'foo'
SyntaxError: invalid syntax
>>> def my_fnc():
        None = 'foo'
SyntaxError: cannot assign to keyword

It's therefore safe to assume that all None references are the same. There isn't any "custom" None.

To test for None use the is operator

When writing code you might be tempted to test for Noneness like this:

if value==None:

Or to test for falsehood like this

if not value:

You need to understand the implications and why it's often a good idea to be explicit.

Case 1: testing if a value is None

Why do

value is None

rather than



The first is equivalent to:


Whereas the expression value==None is in fact applied like this


If the value really is None then you'll get what you expected.

>>> nothing = function_that_does_nothing()
>>> nothing.__eq__(None)

In most common cases the outcome will be the same, but the __eq__() method opens a door that voids any guarantee of accuracy, since it can be overridden in a class to provide special behavior.

Consider this class.

>>> class Empty(object):
...     def __eq__(self, other):
...         return not other

So you try it on None and it works

>>> empty = Empty()
>>> empty==None

But then it also works on the empty string

>>> empty==''

And yet

>>> ''==None
>>> empty is None

Case 2: Using None as a boolean

The following two tests

if value:
    # Do something

if not value:
    # Do something

are in fact evaluated as

if bool(value):
    # Do something

if not bool(value):
    # Do something

None is a "falsey", meaning that if cast to a boolean it will return False and if applied the not operator it will return True. Note however that it's not a property unique to None. In addition to False itself, the property is shared by empty lists, tuples, sets, dicts, strings, as well as 0, and all objects from classes that implement the __bool__() magic method to return False.

>>> bool(None)
>>> not None

>>> bool([])
>>> not []

>>> class MyFalsey(object):
...     def __bool__(self):
...         return False
>>> f = MyFalsey()
>>> bool(f)
>>> not f

So when testing for variables in the following way, be extra aware of what you're including or excluding from the test:

def some_function(value=None):
    if not value:
        value = init_value()

In the above, did you mean to call init_value() when the value is set specifically to None, or did you mean that a value set to 0, or the empty string, or an empty list should also trigger the initialization? Like I said, be mindful. As it's often the case, in Python explicit is better than implicit.

None in practice

None used as a signal value

None has a special status in Python. It's a favorite baseline value because many algorithms treat it as an exceptional value. In such scenarios it can be used as a flag to signal that a condition requires some special handling (such as the setting of a default value).

You can assign None to the keyword arguments of a function and then explicitly test for it.

def my_function(value, param=None):
    if param is None:
        # Do something outrageous!

You can return it as the default when trying to get to an object's attribute and then explicitly test for it before doing something special.

value = getattr(some_obj, 'some_attribute', None)
if value is None:
    # do something spectacular!

By default a dictionary's get() method returns None when trying to access a non-existing key:

>>> some_dict = {}
>>> value = some_dict.get('foo')
>>> value is None

If you were to try to access it by using the subscript notation a KeyError would be raised

>>> value = some_dict['foo']
KeyError: 'foo'

Likewise if you attempt to pop a non-existing item

>>> value = some_dict.pop('foo')
KeyError: 'foo'

which you can suppress with a default value that is usually set to None

value = some_dict.pop('foo', None)
if value is None:
    # Booom!

None used as both a flag and valid value

The above described uses of None apply when it is not considered a valid value, but more like a signal to do something special. There are situations however where it sometimes matters to know where None came from because even though it's used as a signal it could also be part of the data.

When you query an object for its attribute with getattr(some_obj, 'attribute_name', None) getting back None doesn't tell you if the attribute you were trying to access was set to None or if it was altogether absent from the object. The same situation when accessing a key from a dictionary, like some_dict.get('some_key'), you don't know if some_dict['some_key'] is missing or if it's just set to None. If you need that information, the usual way to handle this is to directly attempt accessing the attribute or key from within a try/except construct:

    # Equivalent to getattr() without specifying a default
    # value = getattr(some_obj, 'some_attribute')
    value = some_obj.some_attribute
    # Now you handle `None` the data here
    if value is None:
        # Do something here because the attribute was set to None
except AttributeError:
    # We're now handling the exceptional situation from here.
    # We could assign None as a default value if required.
    value = None
    # In addition, since we now know that some_obj doesn't have the
    # attribute 'some_attribute' we could do something about that.

Similarly with dict:

    value = some_dict['some_key']
    if value is None:
        # Do something here because 'some_key' is set to None
except KeyError:
    # Set a default
    value = None
    # And do something because 'some_key' was missing
    # from the dict.

The above two examples show how to handle object and dictionary cases. What about functions? The same thing, but we use the double asterisks keyword argument to that end:

def my_function(**kwargs):
        value = kwargs['some_key']
        if value is None:
            # Do something because 'some_key' is explicitly
            # set to None
    except KeyError:
        # We assign the default
        value = None
        # And since it's not coming from the caller.
        log_something('did not receive "some_key"')

None used only as a valid value

If you find that your code is littered with the above try/except pattern simply to differentiate between None flags and None data, then just use another test value. There's a pattern where a value that falls outside the set of valid values is inserted as part of the data in a data structure and is used to control and test special conditions (e.g. boundaries, state, etc.). Such a value is called a sentinel and it can be used the way None is used as a signal. It's trivial to create a sentinel in Python.

undefined = object()

The undefined object above is unique and doesn't do much of anything that might be of interest to a program, it's thus an excellent replacement for None as a flag. Some caveats apply, more about that after the code.

With function

def my_function(value, param1=undefined, param2=undefined):
    if param1 is undefined:
        # We know nothing was passed to it, not even None
        log_something('param1 was missing')
        param1 = None

    if param2 is undefined:
        # We got nothing here either
        log_something('param2 was missing')
        param2 = None

With dict

value = some_dict.get('some_key', undefined)
if value is None:
    log_something("'some_key' was set to None")

if value is undefined:
    # We know that the dict didn't have 'some_key'
    log_something("'some_key' was not set at all")
    value = None

With an object

value = getattr(obj, 'some_attribute', undefined)
if value is None:
    log_something("'obj.some_attribute' was set to None")
if value is undefined:
    # We know that there's no obj.some_attribute
    log_something("no 'some_attribute' set on obj")
    value = None

As I mentioned earlier, custom sentinels come with some caveats. First, they're not keywords like None, so Python doesn't protect them. You can overwrite your undefined above at any time, anywhere in the module it's defined, so be careful how you expose and use them. Next, the instance returned by object() is not a singleton. If you make that call 10 times you get 10 different objects. Finally, usage of a sentinel is highly idiosyncratic. A sentinel is specific to the library it's used in and as such its scope should generally be limited to the library's internals. It shouldn't "leak" out. External code should only become aware of it, if their purpose is to extend or supplement the library's API.


It's not called null as in other languages, but None. There is always only one instance of this object, so you can check for equivalence with x is None (identity comparison) instead of x == None, if you want.


In Python, to represent the absence of a value, you can use the None value (types.NoneType.None) for objects and "" (or len() == 0) for strings. Therefore:

if yourObject is None:  # if yourObject == None:

if yourString == "":  # if yourString.len() == 0:

Regarding the difference between "==" and "is", testing for object identity using "==" should be sufficient. However, since the operation "is" is defined as the object identity operation, it is probably more correct to use it, rather than "==". Not sure if there is even a speed difference.

Anyway, you can have a look at:


Null is a special object type like:

<class 'NoneType'>

You can check if an object is in class 'NoneType':

>>>variable = None
>>>variable is None

More information is available at Python Docs


Per Truth value testing, 'None' directly tests as FALSE, so the simplest expression will suffice:

if not foo:

Licensed under: CC-BY-SA with attribution
Not affiliated with: Stack Overflow
Email: [email protected]